Civil QC Inspector MCQ's Online Free Mock Test-4
Get online test series along with free mock tests for Civil QC-Inspectors / Engineers and other exams.
Mock Test-4
Number of Questions - 30
Notes : The Quiz makes In multiple-choice quiz, there is a timer for 50 seconds/question.When 10 seconds is left, automatically the timer is red in color.finally, when the time is end,the correct answer is automatically shown.
Example Questions:
- The minimum time that a plastic sheet should be in place on concrete surface to determine its moisture content by plastic sheet method, ASTM D4263 is
- End of Vibration to be covered with as coate bar used in concrete.
- Dune sand or clean sand used, as fill material requires a cap layer of cohesive material, 150mm thick to 300mm thick.
- Base and sub base of asphalt paving shall be compacted to …… and …… %.respectively of the maximum laboratory density.
- ACI means,
- Amount of selected fill material passing ..................sieve shall be 100%.
- Compaction shall begin only after the fill or backfill has been properly placed and the material to e compacted is at the proper moisture content………….of the optimum moisture content per ASTM D1557 or ASTM D698, whichever is applicable.
- Fill or backfill placed beneath footings, grade beams, mats, buildings, and process areas shall be compacted to at least …….% of the maximum Modified Proctor density as determined by ASTM D1557
- When the extent of damaged coating exceeds _____ % of the surface area of the coated steel reinforcing bar in any 0.3m (1-ft) length, the coated bar should be rejected. (ASTM A775, Sec. )<1.3.8)
- Concrete shall not be dropped freely where reinforcing will cause segregation nor where it would fall freely for more than ……………..
Top 30 Typical Interview Questions and Answers for Civil Site Engineer | Civil Site Inspector | QA QC Engineer | QC Civil Inspector
