Welding / NDT QC Inspector Online Free Mock Test-4
Get online test series along with free mock tests for Welding / NDT QC-Inspectors / Engineers and other exams.
Mock Test-4
Number of Questions - 30
Notes : The Quiz makes In multiple-choice quiz, there is a timer for 50 seconds/question.When 10 seconds is left, automatically the timer is red in color.finally, when the time is end,the correct answer is automatically shown.
>> CLICK HERE <<
Example Questions:
- A welder is qualified to weldall thickness of material when…………………..
- What is the maximum defect permitted on the convex surface of a welder qualification bend test after bending,except for corner cracks and corrosion resistant weld overlay?
- What period of inactivity from a givenwelding process requires the welder to requalify in that process??
- Notch-toughness requirments are mandatory……….
- A welder qualified for SMAW using an E7018 electrodeis also qualified to weld with……….
- For P-11 materials,weld grooves for thickness…………….. Shall be prepared by thermal process,when such processes are to be employed during fabrication
- A stud welding procedure must be requalified if there is a deviation of plus or minus ……….seconds in the arc timing.
- Applying preheat when welding carbon manganese steel is normally done to avoid...
Top 30 Typical Interview Questions and Answers for Welding /NDT Quality Control Engineer | Welding /NDT Site Inspector | QA/QC Engineer | QC Welding /NDT Inspector
#sapid_welding, #aramco_cbt_welding_qc_inspector, #questions_answers_pdf_free, welding _ndt_qc_notes,