A-175 FORM Xlsx
000175 General template for Special inspection form
10200 : HIC Testing: API 5L Line Pipe, In-Plant Piping, and Pressure Vessel Steels.
10300 : PIPE: Plain End Electric Resistance or Electric Induction Welded Steel Pipe, 4“ and Above in Nominal Diameter.
10400 : PIPE: High Frequency Welded Line Pipe, Class C, NPS 4 and larger.
10600 : PIPE: Carbon Steel; Seamless or Longitudinal Seam Submerged-Arc Welded; Purchased Small Quantities in accordance with 01-SAMSS-038.
10700 : PIPE: Beveled End, Seamless or Submerged Arc Welded, Straight or Spiral Seam, Carbon Steel Pipe 6“.
10701 : PIPE: Beveled End, Seamless, Carbon Steel Pipe < 6”.
12000 : PIPE & FITTINGS: Fiberglass; TRP (Glass-Fiber-Reinforced Thermosetting Resin) & RPMP (Glass-Fiber-Reinforced Plastic-Mortar).
12500 : CONCRETE MORTAR LINING: for Internal Surfaces of Line Pipe and Fittings.
12800 : CONCRETE WEIGHT COATING; For Line Pipe Used Underwater.
"13100 : (a) PIPE: Fabrication of Spools; Carbon, Alloy, High Strength Special, Low and High Temperature Steels.
(b) PIPE BENDS; Shop Formed; Cold Bends, Furnace Hot Bends and Induction Bends."
14300 : TUBES: for Condensers, Tubular Heat-Exchangers, and Similar Heat Transfer Apparatus, Seamless cold-drawn low-carbon steel; 1/8” to 3” outside diameter.
14301 : TUBES: for Condensers and Heat Exchangers, Externally Helical, Integrally Finned Aluminum-alloy Seamless with finned or un-finned ends, with continuous fins, or with un-finned sections; up to 2 in. outside diameter.
14400 : CONDENSER TUBES: Seamless tube and ferrule stock of copper and various copper alloys up to 31/8” inch inclusive, in diameter for use in surface condensers, evaporators, and heat exchangers.
17800 : PIPE: Seamless 1” and Larger; and Straight Seam Submerged Arc Welded 16” and Larger; for Low Temperature Service.
18200 : PIPE: Seamless or Welded; Carbon or Alloy Steel; A312; A335; A376; A430 or A524.
18400 : PIPE: Electric Fusion Welded Austenitic Chromium Nickel Alloy Steel Pipe for High Temperature Service.
19500 : PIPE: High Temperature, ASTM A-369; A-426; A-451, or A-660.
19800 : PIPING: Auxiliary; For Mechanical Equipment Associated with Compressors, Pumps, Fans, Turbines and Gears.
22500 : FLANGES, SPECTACLE PLATES, SPACERS & BLINDS.
"22501 : FLANGES: Weld Neck, Forged Steel; for Temperature Ranges From -50C to
+425C; Classes A105; A350 LF2, LF6CL1 & 2; A266 CL2 & 4; A707 L3CL1, 3 &
4, L5 CL3 & 4 and Approved Equivalents; Includes Welding Ends for Swivel Ring and Lapped Joint Flanges."
23400 : PIPE COMPONENTS: Low Temperature Service, Wrought Carbon Steel and Alloy Steel; Seamless & Welded Construction; Includes elbows, tees, welding outlets, reducers, caps, bosses, couplings, unions, bushings, swaged nipples, pipe nipples, stub ends, blind flanges, spectacle plates, spacers & slip blinds. Sizes ¾”.
23800 : JOINTS/SPOOLS: Insulating, for Cathodic Protection.
26100 : FITTINGS: Pipe, Butt Welding; Grade WPB Wrought Carbon Steel & High Strength Fittings; Seamless or Welded; Suitable for wet, sour service. Excludes cast fittings, corrosion resistant alloy fittings and pipe bends.
26400 : FITTINGS: For Use In HOT TAP and/or Stopple Operations; Wet & Sweet Sour Services; Include - Split Tees, Stopple Fittings, Full Encirclement Saddles, Flanges, Lock-O-Ring (LOR) Flanges.
26500 : FITTINGS: ALLOY STEEL (INCLUDING STAINLESS STEEL).
26800 : TRAP, SCRAPER: Permanent Scraper Traps for Line Sizes 4”, for Pressure Ratings of Class 150 to 1500. Applies to Water or Hydrocarbon Services, Onshore and Offshore.
30100 : Stockiest Supplied Inspectable Materials
43000 : Valve Material Certification Requirements: for SA-175 forms 043600, 043601, 045600 & 341900.
43600 : VALVES; Metallic; Includes gate, globe, angle, check, needle, ball, plug, piston, butterfly and choke; Excludes Control, safety-relief, relief, surge relief, solenoid, pilot (& other valves classified under SAMS Class 34), wellhead valves under SAMS Class 45 and API 6A
43601 : VALVE: Low Severity, utility service in cast iron, brass material, and butterfly valves. Excluding high performance butterfly valves.
"45600 : VALVES & CHOKES: API SPEC 6A 10,000 PSI 1 13/16”; For Use in Sour Wet
Services Downstream of the Wellhead and Tree Assembly."
60100 : GASKETS: Metal, Spiral-Wound or Jacketed.
70200 : MANILA OR NYLON ROPE.
70600 : WIRE OR WIRE ROPE.
71300 : SLINGS: Using Chain, Wire Rope, Manila, Nylon, Polyester, Polypropylene or Synthetic Webbing.
80100 : HOSES: Marine Oil; Offshore Tanker Loading.
80101 : HOSES: Oil Suction and Discharge Services; For Dock Tanker Loading.
90100 : SCAFFOLD PLANK: Wood, for use with all scaffolding except where restricted by load limitations or other site conditions.
90200 : LUMBER: Wood Piles, Timbers and Ties.
90700 : DOORS: Wood Flush, Solid Core; Fire Rated.
91300 : COATING: Shop Applied, Internal or External.
91400 : COATING: Shop Applied; For Drilling Tubulars.
91900 : COATING: SHOP APPLIED, For Tanks, Piping, Pipelines (and Associated Appurtenances & Fittings), Structures, Process Equipment, Internal & External; Onshore, Offshore and/or Sub sea.
92000 : COATING: SHOP APPLIED (Electrostatic Spray); Fusion Bonded Epoxy on Deformed and Plain Steel Reinforcing Bars.
92100 : COATING: SHOP APPLIED; Application of Composite Fluropolymer / Ceramic Coatings to Fasteners.
92200 : COATING: Shop Applied; Extruded 3-Layer Polypropylene & 3-Layer P.E. Polyethylene External Coating for Line Pipe.
100100 : FASTENERS: Alloy or Stainless Steel Nuts & Bolting Materials: Bars, Bolts, Screws, Studs, Stud Blots, & Wire; For use in High or Low Temperature Services.
Code : Description
120100 : STEEL STRUCTURES: (Excludes Offshore Structures and Pre-engineering Metal Buildings).
120200 : BUILDING: Metal; One Story, Pre-engineered.
120400 : DOORS AND FRAMES: Steel; Fire Rated or Blast Resistant.
120500 : TOWER: Communication.
120700 : FENCING: Security, Fabricated Gates
"121400 : STRUCTURAL PLATES ROLLED SHAPES, TUBULARS: Carbon Steel or
Carbon Manganese Steel, For Fixed Offshore Platforms."
121600 : FIBER REINFORCED PLASTICS (FRP) Grating and FRP Components
121900 : BUILDING: Pre-fabricated.
130300 : GEAR UNITS: Special purpose.
130900 : COUPLING: Shaft, Special Purpose.
131000 : GEAR UNITS: General Purpose, Limited to 3,000 HP.
140200 : TRANSFORMER: Distribution; Pad-Mounted, Compartmental-Type, Self-cooled, Three-Phase.
140300 : TRANSFORMERS: Power; 3 Phase, Dry Type, 501 KVA and Larger.
140400 : TRANSFORMER: Distribution; Overhead Type, Self-Cooled, Single-Phase and Three-Phase.
140500 : TRANSFORMERS: Power; Oil Filled, 60 Hz.
142100 : WOOD: Utility Pole.
142101 : WOOD: Cross Arm or Cross Braces.
"150100 : SUBMARINE POWER CABLE 5 KV THROUGH 115 KV: Designed to AEIC and
ICEA Specifications."
150200 : MEDIUM VOLTAGE POWER CABLE: Solid Dielectric Insulated Cables for Rated Voltages of 5 kV through 35 kV
150300 : HIGH VOLTAGE POWER CABLE: High Pressure Pipe Type, and Low and Medium Pressure Self-Contained Liquid Filled.
150400 : HIGH VOLTAGE POWER CABLE: Solid Dielectric Insulated Cables for Rated Voltages of 69 kV through 138 kV.
"160100 : POWER CIRCUIT BREAKER SWITCHGEAR and DRAWOUT POWER
CIRCUIT BREAKERS: Metal-Enclosed, Low Voltage"
160300 : INDOOR CONTROLGEAR; High Voltage, Built to Either IEC or NA, 50 or 60 Hz, 3 Phase up to 4160 volts.
160400 : CONTROL SWITCHBOARDS.
160500 : SWITCHGEAR: Metal-Clad, Air Insulated, Indoor, 1 to 38 KV.
160600 : Metal Enclosed Bus: Indoor and Outdoor; Self-Cooled, Non-segregated-phase, Rated up to and including 34.5 KV.
160700 : SF6 Gas Insulated Circuit Breakers Outdoor – 34.5 kV through 230 kV
162000 : INDOOR CONTROLGEAR; Low Voltage, Built to Either IEC or NA, 50 or 60 Hz, 3 Phase up to 480 volts, or Single Phase up to 277 volts.
162600 : SWITCHGEAR: Load Interrupting, Manually Operated, Pad Mounted, Circuit Breakers & Fuses, 1 KV Through 15 KV.
162700 : OUTDOOR SWITCHRACK, Low Voltage
170200 : MOTORS, ELECTRIC: Severe Duty Totally Enclosed Squirrel Cage Induction Motors to 500 HP, 4000 V or Below and Explosion Proof Motors.
170300 : MOTORS: Form-Wound, Squirrel-cage Induction 250 HP and Larger, or Brushless Synchronous 500 HP and Larger.
170301 : GENERATORS: Brushless, Synchronous, Continuous Duty, 3 Phases, 60 Hertz, 600 to 6500 KVA, Built to ANSI/NEMA MG1-22.
"170400 : DIESEL ENGINE GENERATOR SETS: Stationary or Potable, Rated From
35 kW up to and Including 2000 kW. This is not Applicable to Shipboard Marine Installations."
170700 : RECTIFIERS; Conventional (Tap Adjustable) or Phase Controlled.
171300 : GALVANIC ANODES: For Cathodic Protection.
171400 : IMPRESSED CURRENT ANODES: For Cathodic Protection.
171500 : CABLE: 600 Volts MAX., for Cathodic Protection.
172500 : BATTERY CHARGER.
172600 : BATTERY CHARGER/RECTIFIER with rating less than 100 ADC: indoor, electrically controlled, for charging stationary lead-acid or nickel-cadmium batteries.
173100 : POWER SUPPLY, PHOTOVOLTAIC (PV): For Cathodic Protection.
"173400 : UNINTERUPTABLE POWER SUPPLY (UPS) SYSTEMS: Continuous-Duty,
Solid State, 1 and 3 Phase, 60 or 50 Hertz, 10 KVA or Larger Rated Capacity."
173700 : AUXILIARY ELECTRICAL SYSTEMS: As provided on custom-engineered, factory-assembled and pre-wired equipment skids.
173800 : STATIONARY BATTERIES.
220200 : FLOAT: For Submarine Oil Hose, 12" to 24" Diameter.
220300 : CHAIN, ANCHOR CHAIN, SHACKLES or SWIVELS.
220500 : Building and Inspection of a Hydrographic Survey Vessel (Launch)
230100 : DISTRIBUTED CONTROL SYSTEM (DCS): Equipment and Associated Software; Excludes Advanced Control Systems, Field Instrumentation, Auxiliary Systems, Remote Terminal Units, and Management Information Systems.
230200 : SUPERVISORY CONTROL and DATA ACQUISITION (SCADA) System.
230300 : TERMINAL MANAGEMENT SYSTEM (TMS) EQUIPMENT AND ASSOCIATED SOFTWARE.
270200 : PACKAGED WATER-COOLED CENTRIFUGAL CHILLERS.
270300 : DIRECT EXPANSION AIR CONDITIONING SYSTEMS: For Offshore Facilities, 10-Ton Cooling Capacity and Over.
300100 : DIESEL ENGINES: Reciprocating, Compression-Ignition.
310100 : TWIN-SCREW MULTIPHASE PUMP: API 676
310200 : MECHANICAL SEALS FOR PUMPS
310300 : PUMPS: Positive Displacement Rotary.
310400 : PUMPS: Positive Displacement Reciprocating.
310500 : PUMPS: Centrifugal, Horizontal, End Suction Single Stage, or Vertical In-line.
310600 : PUMP: API, Centrifugal.
310700 : Fire Pumps: Centrifugal, Horizontal and Vertical
310800 : HELICAL-AXIAL MULTIPHASE PUMP: API 610 (Modified)
310900 : PUMPS: Submersible, Bowl Type, Including Electric Motors.
311400 : PUMPS: Jet Fuel Additives Injection, Product Hydraulic Turbine Driven
311500 : PUMPS: Positive Displacement, Controlled Volume, Diaphragm & Packed Plunger Types. (Excluded: Diaphragm Pumps using Mechanical Actuation)
311800 : COMPRESSOR: Reciprocating for Process Air or Gas Service
311900 : COMPRESSOR: Centrifugal
311901 : AIR COMPRESSOR: Centrifugal, Constant Speed, Packaged, Integrally Geared, Including Accessories.
312000 : COMPRESSOR: Integrally Geared, Centrifugal.
312200 : COMPRESSOR: Reciprocating, In Plant And Instrument Air Service. This Does Not Apply To Compressors For Services Requiring Less Than 140 SCFM.
312400 : COMPRESSOR: Rotary, for General Refinery Service.
312600 : Dry Gas Seals for Gas Compressors
313100 : HOISTS OR OVERHEAD CRANES: Lifting Capacity Over 500 Kg.
"313800 : CENTRIFUGAL FLUOROCARBON REFRIGERATION UNITS: For Industrial /
Process Applications, on & Offshore, This Does Not Apply to Refrigeration Units for Utility Service."
320200 : TURBINE: Steam, General Purpose or Special Purpose
"320300 : POSITIVE MATERIAL IDENTIFICATION (PMI): For ASME B31.3, B31.4, and
B31.8 Piping components, including welds, and other piping or equipment where specified in the SAMS or Purchase Order."
321300 : BOILER: Power; Water tube.
321500 : High Intensity Burner for sulfur recovery unit combustion chamber.
321900 : PRESSURE VESSEL
323100 : HEAT EXCHANGERS: Shell and Tubes.
323300 : HEAT EXCHANGERS: Plate and frame
323400 : HEAT EXCHANGERS: Electrical, Immersion-type.
323500 : FLOATING HEADS, or TUBE BUNDLES, Separately Ordered.
323600 : HEAT EXCHANGERS; UNCLAD AIR-COOLED.
323700 : HEATER: Direct fired.
324300 : COOLING TOWERS: Induced Draft, Used for Domestic and Industrial Applications.
324900 : TANKS: Atmospheric, Steel, Within The Scope of API-650; Except for Tanks According to Appendix F of the The Same Standard.
324901 : TANKS: Low Pressure, Steel, Within The Scope of API-620. Except for Tanks According to Appendix Q and Double Wall Tanks according to Appendix R of the Same Standard.
325000 : COLUMN TRAYS AND PACKING
325100 : TANKS: Steel; Aboveground or Underground to API-12F, API-650 Appendix-J, UL-58, and UL-142.
325200 : TANK: Fiberglass; Underground; UL-1316 or ASTM D4021, Single or Double Wall; Spherical or Horizontal.
325300 : TANK: Aboveground, Fiberglass to AWWA D120, ASTM D3299, API-12P.
325400 : Reverse OSMOSIS Systems
"325500 : INLET AIR FILTRATION SYSTEMS for; (A) COMBUSTION GAS TURBINES to 32-SAMSS-008; (B) CENTRIFUGAL AIR COMPRESSORS to 32-SAMSS-016;
For use in both onshore and offshore environments. Systems are limited to the automatic pulse-jet self-cleaning type."
325519 : COMBUSTION GAS TURBINE BACKAGE."
"326100 : LUBRICATION, SHAFT SEALING and CONTROL OIL SYSTEMS: This form is
not applicable to Combustion Gas Turbine Lubrication Systems."
326700 : FLARE SYSTEMS: Including Flare Stacks, Flare Tips, Dry Gas Seals, and Knockout & Liquid-Seal Drums.
327300 : MIXERS: Side Entry.
328110 : REFRACTORIES: Hydraulic-Setting, Castable Systems; To be used on pressure vessels, boilers, process heaters; HEX’s, piping and flares tips.
328120 : REFRACTORIES: Ceramic Fiber System (RCF)for Boilers and Process Heaters.
340100 : VALVES: Control, Steel, General Service, Pneumatic Operated, Up to and Including Class 600 ratings.
340200 : INSTRUMENTATION FOR PACKAGED UNITS
341000 : ACTUATORS, VALVE (a) Pneumatic Actuators ON-OFF Service to 34-SAMSS- 716; (b) Electric Motor Operated Valve Actuators to 34-SAMSS-718.
341001 : ACTUATOR, VALVE, HYDRAULIC: With Integral or Remote Power Unit for Rising Stem and Quarter Turn Valves. Excluded are Actuators for Offshore Well Platforms and Wellhead Valves.
341600 : AUTOMATIC TANK GAUGING EQUIPMENT (a) Float Type, Spring Motor Driven; (b) Displace Type, Servo-Motor Driven.
341900 : VALVE: Safety Relief Conventional And Balanced Type.
342000 : VALVE: Safety Relief, Pilot Operated Types.
342800 : MECHANICAL METER PROVERS: Bi-Directional Displacement-Type; For Use In Royalty And Custody Transfer Applications (Covers Complete Packaged And Skid-Mounted Unit Including Pipe-Prover Valves, Locally Installed Instruments And Auxiliary Equipment For Meter).
342900 : METER: Flow, Turbine.
343000 : METERS: Positive Displacement, Liquid and Gas.
"343100 : INSTRUMENT CONTROL PANELS:
1. INDOOR; To 34-SAMSSS-820 for Panels, Cabinets, Consoles and Marshalling Cabinets in Electrically Unclassified Air-Conditioned Buildings.
2. OUTDOOR; To 34-SAMSSS-821 for Panels and Cabinets for Locations in Electrically Classified or Unclassified Outdoor Areas."
343200 : CHROMATOGRAPHS: Process Gas.
343300 : ANNUNCIATORS
"343500 : FIRE DETECTION and ALARM SYSTEMS: Includes But Not Limited To, Fire Alarm Control Panels, Associated Detectors, Manual Alarm Box Stations, Visual
& Audible Devices (Sirens, Bells, Horns, etc.), UV Detection Systems, External Terminal Strips, Power Supplies."
343600 : PIPELINES LEAK DETECTION SYSTEMS (LDS)
344000 : PROGRAMMABLE LOGIC CONTROLLER
344200 : ESD LOGIC SYSTEM
344300 : RELAY EMERGENCY SHUTDOWN SYSTEMS
"344400 : PROGRAMMABLE CONTROLLER BASED ESD SYSTEMS: Fail – Safe, Fault
- Tolerant"
344900 : MONITORS: Combustible Gas or Hydrogen Sulfide, Stationary.
345100 : MONITORING SYSTEMS: Vibration, Axial Position, and Bearing Temperature.
345300 : DENSITY METERS
345400 : ANALYZER: OXYGEN; Covers Flue Gas, Trace, Dissolved On-Line or Portable Analyzers.
345600 : FLAME MONITORING SYSTEMS: For igniters and burners used in fired equipment.
347400 : ANALYZER: MOISTURE; Covers Both In-Line (or “in-situ”) and Extractive.
"347500 : AUTOMATIC SAMPLERS: for Petroleum and Petroleum Products (See Note 2
for Exceptions)."
"347600 : INSTRUMENTATION AND THERMOCOUPLE EXTENSION CABLE: For
Signaling and Control Purposes (Excluding Data Highway Cable)."
348000 : Inspect TETRA Device Operating in Hazardous Area.
450100 : CASING AND TUBING.
450400 : DRILL PIPE.
450600 : CASING: API-5L STEEL GRADES X-42 TO X-70 (Note 1).
450700 : COATING: Shop applied, external FBE; for Drilling Tubulars, Cathodically Protected OCTG.
451400 : WIRE ROPE: includes Drill Line, Raising Line & Cable, and Wire line (Well Measuring).
451500 : DOWNHOLE COMPLETION EQUIPMENT
451600 : BLOWOUT PREVENTERS (BOP) HOSES
"451700 : ANNULAR & RAM TYPE BOP UNITS AND DIVERTERS: All Working Pressure
Ranges."
451900 : ROTARY OR VIBRATOR HOSE
452000 : ROTARY SWIVER
452100 : ROTARY SWIVEL, DRILLING HOOK, TRAVELLING BLOCK or HOOK- BLOCK COMBINATION
452300 : DRILL COLLARS WITH INTEGRAL CONNECTORS & KELLYS.
452400 : TOP DRIVE DRILLING SYSTEM
453100 : CEMENTS FOR WELL CEMENTING.
453600 : WELLHEAD COMPONENTS: Back Pressure Valves and two Way check Valves.
453700 : WELLHEAD COMPONENTS: Polished Nipples, Tubing Hanger.
"453800 : WELL HEAD EQUIPMENT: API 6A, PSL, 1-2, SOUR WET SERVICE
(Note 1 & 2)."
453900 : WELLHEAD EQUIPMENT: API 6A, PSL 3 & 4, Sour Wet Service (Note 1).
454000 : WELL CONTROL EQUIPMENT.
454100 : ACTUATOR ASSEMBLY: Hydraulic; SSV
454400 : VALVE ASSEMBLY: Safety, Subsurface.
454500 : MUD VALVE and LOW TORQUE VALVES.
460100 : DRILLING EQUIPMENT SPARE PARTS: Ordered Directly from the Original Equipment Manufacturers (OEM) or through Distributors.
730100 : ROTORS: Separately Ordered for Turbines.
740100 : PANTOGRAPH (OUTBOARD) CABLES: For Marine Loading Arms, Galvanized & Non-Galvanized, Size 7/8 inch to 1-3/4 inch Nominal Diameter.
780000 : CENTAC ROTOR ASSEMBLY - ALL STAGES (SPARES).
790700 : IMPELLER: Separately Ordered, for API Pumps with rated power equal to or grater than 300 HP per stage.