Instrumentation Engineering CBT Online Free
Mock Test-5
Number of Questions - 30
Notes : The Quiz makes In multiple-choice quiz, there is a timer for 50 seconds/question.When 10 seconds is left, automatically the timer is red in color.finally, when the time is end,the correct answer is automatically shown.
Example Questions:
- Conduit and cable entries to field junction boxes shall be through the …………………...
- Solenoid Valves shall be equipped with ……………………………....
- A maximum of ………….users (single pneumatic instruments or valves) may be connected to one 1/2-inch takeoff.
- The cable tie shall have a maximum continuous use temperature rating of ………... or higher.
- As a Distribution panels shall be furnished with a minimum of …………... spare circuit breakers.
- Electronic signal wire shall be UL listed , stranded copper, a minimum…………………...for multicore cable.
- If the tubing O.D. is 1/2 inches or less, provide at least………. straight length
- The conduction loss versus device current characteristic of a power MOSFET is best approximated by ……….
- Which is not applicable method to detect the presence of Toxic Gas .?
- Which is a type of Electrically-Erasable Programmable Read-Only Memory?
